webleads-tracker

Ø19 Short flush non-illuminated

Ø19 Short flush non-illuminated
Ø19 Short flush non-illuminated
Ø19 Short flush non-illuminated
The R.series is a range of vandal-resistant pushbuttons that are designed to improve the durability and strength of control panels.
These pushbuttons are protected to IK09 and IP65, which makes them ideal for use in exposed public areas or aggressive industrial environments.

Different versions available:

  • Ø19
  • Materials: Stainless steel, brass, nickel plated brass
  • Flush actuator
  • Switching: 1NO
  • Pin terminal or screw terminal

 

TYPICAL APPLICATIONS
  • Access control, security systems
  • Exposed public areas: ticketing machines, vending machines, kiosks
  • Industrial: machinery and factory equipment..
ELECTRICAL CHARACTERISTICS
  • Switching rate:
    • 2A / 36VDC
  • Electrical life (full load):
    • 200 000 cycles
  • Insulation resistance
    • > 1000 MΩ
  • Contact resistance:
    • ≤ 50 mΩ
  • Dielectric strength
    • 2000 VAC
ENVIRONMENTAL CHARACTERISTICS
  • Temperature:
    • Operating -20°C to +55°C
  • Vandal resistance:
    • Impact resistant to IK09
    • Sealed to IP65
  • RoHs
MECHANICAL CHARACTERISTICS
  • Actuating force
    • ≈ 4N
  • Mechanical lifetime
    • 1 million of cycles
SWITCHING SYSTEM
  • Contact arrangement:
    • 1 NO (Normally Open )
  • Function:
    • Momentary
  • Terminals:
    • Pin terminal 2.8mm x 0.5mm and Screw terminal

STANDARD PART NUMBERS
On the references below replace the symbol "Φ"› by the code of the desired material
S = S  
tainless steel
N =   
Nickel-plated brass
  
G =   
Gold-plated brass
SB =  
Brushed

SCREW TERMINAL 
 
 
                   Référence: R19FFΦSTAG
 

R19FFxSTAG.jpg (313×164)

PIN TERMINAL (2.8mm x 0.5mm)

                 Référence: R19FFΦSPAG

R19FFxSPAG.jpg (378×164)

Slow-action contact
NON-ILLUMINATED STANDARD PART NUMBERS
Pushbutton, pin terminal (SP)
  Front shape Material Numbers Draw
Pin Terminal (2×0.5mm) (SP) DOMED (DF) Stainless steel (S) R19DFSSPAG A
Pin Terminal (2×0.5mm) (SP) DOMED (DF) Nickel plated brass(N) R19DFNSPAG A
Pin Terminal (2×0.5mm) (SP) DOMED (DF) Al alloy black (A) R19DFASPAG A
Pin Terminal (2×0.5mm) (SP) FLUSH (FF) Stainless steel (S) R19FFSSPAG B
Pin Terminal (2×0.5mm) (SP) FLUSH (FF) Nickel plated brass(N) R19FFNSPAG B
Pin Terminal (2×0.5mm) (SP) FLUSH (FF) Al alloy black (A) R19FFASPAG B
Pin Terminal (2×0.5mm) (SP) RAISED (FR) Stainless steel (S) R19FRSSPAG C
Pin Terminal (2×0.5mm) (SP) RAISED (FR) Nickel plated brass(N) R19FRNSPAG C
Pin Terminal (2×0.5mm) (SP) RAISED (FR) Al alloy black (A) R19FRASPAG C
Pin Terminal (2×0.5mm) (SP) SUPER FLUSH (PF) Stainless steel (S) R19PFSSPAG D
Pin Terminal (2×0.5mm) (SP) SUPER FLUSH (PF) Nickel plated brass(N) R19PFNSPAG D
Pin Terminal (2×0.5mm) (SP) SUPER RAISED (PR) Stainless steel (S) R19PRSSPAG E
Pin Terminal (2×0.5mm) (SP) SUPER RAISED (PR) Nickel plated brass(N) R19PRNSPAG E
 
NON-ILLUMINATED STANDARD PART NUMBERS
Pushbutton, screw terminals (ST)
  Front shape Material Numbers Draw
Screw Terminal (ST) DOMED (DF) Stainless steel (S) R19DFSSTAG F
Screw Terminal (ST) DOMED (DF) Nickel plated brass(N) R19DFNSTAG F
Screw Terminal (ST) DOMED (DF) Al alloy black (A) R19DFASTAG F
Screw Terminal (ST) FLUSH (FF) Stainless steel (S) R19FFSSTAG G
Screw Terminal (ST) FLUSH (FF) Nickel plated brass(N) R19FFNSTAG G
Screw Terminal (ST) FLUSH (FF) Al alloy black (A) R19FFASTAG G
Screw Terminal (ST) RAISED (FR) Stainless steel (S) R19FRSSTAG H
Screw Terminal (ST) RAISED (FR) Nickel plated brass(N) R19FRNSTAG H
Screw Terminal (ST) RAISED (FR) Al alloy black (A) R19FRASTAG H
Screw Terminal (ST) SUPER FLUSH (PF) Stainless steel (S) R19PFSSTAG I
Screw Terminal (ST) SUPER FLUSH (PF) Nickel plated brass(N) R19PFNSTAG I
Screw Terminal (ST) SUPER RAISED (PR) Stainless steel (S) R19PRSSTAG J
Screw Terminal (ST) SUPER RAISED (PR) Nickel plated brass(N) R19PRNSTAG J
 
 

Technical datasheet R19 mm short flush non-illuminated