Ø19 Short flush non-illuminated
The R.series is a range of vandal-resistant pushbuttons that are designed to improve the durability and strength of control panels.
These pushbuttons are protected to IK09 and IP65, which makes them ideal for use in exposed public areas or aggressive industrial environments.
Different versions available:
- Ø19
- Materials: Stainless steel, brass, nickel plated brass
- Flush actuator
- Switching: 1NO
- Pin terminal or screw terminal
TYPICAL APPLICATIONS
-
Access control, security systems
-
Exposed public areas: ticketing machines, vending machines, kiosks
-
Industrial: machinery and factory equipment..
ELECTRICAL CHARACTERISTICS
- Switching rate:
- 2A / 36VDC
- Electrical life (full load):
- 200 000 cycles
- Insulation resistance
- > 1000 MΩ
- Contact resistance:
- ≤ 50 mΩ
- Dielectric strength
- 2000 VAC
ENVIRONMENTAL CHARACTERISTICS
- Temperature:
- Operating -20°C to +55°C
- Vandal resistance:
-
Impact resistant to IK09
- Sealed to IP65
-
- RoHs
MECHANICAL CHARACTERISTICS
- Actuating force
- ≈ 4N
- Mechanical lifetime
- 1 million of cycles
SWITCHING SYSTEM
- Contact arrangement:
- 1 NO (Normally Open )
- Function:
-
Momentary
-
- Terminals:
- Pin terminal 2.8mm x 0.5mm and Screw terminal
STANDARD PART NUMBERS
On the references below replace the symbol "Φ"› by the code of the desired material
S = S
tainless steel
N =
Nickel-plated brass
G =
Gold-plated brass
SB =
PIN TERMINAL (2.8mm x 0.5mm)
Référence: R19FFΦSPAG
Slow-action contact
Brushed
SCREW TERMINAL
SCREW TERMINAL
Référence: R19FFΦSTAG
PIN TERMINAL (2.8mm x 0.5mm)
Référence: R19FFΦSPAG
Slow-action contact
| NON-ILLUMINATED STANDARD PART NUMBERS | ||||
| Pushbutton, pin terminal (SP) | ||||
| Front shape | Material | Numbers | Draw | |
| Pin Terminal (2×0.5mm) (SP) | DOMED (DF) | Stainless steel (S) | R19DFSSPAG | A |
| Pin Terminal (2×0.5mm) (SP) | DOMED (DF) | Nickel plated brass(N) | R19DFNSPAG | A |
| Pin Terminal (2×0.5mm) (SP) | DOMED (DF) | Al alloy black (A) | R19DFASPAG | A |
| Pin Terminal (2×0.5mm) (SP) | FLUSH (FF) | Stainless steel (S) | R19FFSSPAG | B |
| Pin Terminal (2×0.5mm) (SP) | FLUSH (FF) | Nickel plated brass(N) | R19FFNSPAG | B |
| Pin Terminal (2×0.5mm) (SP) | FLUSH (FF) | Al alloy black (A) | R19FFASPAG | B |
| Pin Terminal (2×0.5mm) (SP) | RAISED (FR) | Stainless steel (S) | R19FRSSPAG | C |
| Pin Terminal (2×0.5mm) (SP) | RAISED (FR) | Nickel plated brass(N) | R19FRNSPAG | C |
| Pin Terminal (2×0.5mm) (SP) | RAISED (FR) | Al alloy black (A) | R19FRASPAG | C |
| Pin Terminal (2×0.5mm) (SP) | SUPER FLUSH (PF) | Stainless steel (S) | R19PFSSPAG | D |
| Pin Terminal (2×0.5mm) (SP) | SUPER FLUSH (PF) | Nickel plated brass(N) | R19PFNSPAG | D |
| Pin Terminal (2×0.5mm) (SP) | SUPER RAISED (PR) | Stainless steel (S) | R19PRSSPAG | E |
| Pin Terminal (2×0.5mm) (SP) | SUPER RAISED (PR) | Nickel plated brass(N) | R19PRNSPAG | E |
| NON-ILLUMINATED STANDARD PART NUMBERS | ||||
| Pushbutton, screw terminals (ST) | ||||
| Front shape | Material | Numbers | Draw | |
| Screw Terminal (ST) | DOMED (DF) | Stainless steel (S) | R19DFSSTAG | F |
| Screw Terminal (ST) | DOMED (DF) | Nickel plated brass(N) | R19DFNSTAG | F |
| Screw Terminal (ST) | DOMED (DF) | Al alloy black (A) | R19DFASTAG | F |
| Screw Terminal (ST) | FLUSH (FF) | Stainless steel (S) | R19FFSSTAG | G |
| Screw Terminal (ST) | FLUSH (FF) | Nickel plated brass(N) | R19FFNSTAG | G |
| Screw Terminal (ST) | FLUSH (FF) | Al alloy black (A) | R19FFASTAG | G |
| Screw Terminal (ST) | RAISED (FR) | Stainless steel (S) | R19FRSSTAG | H |
| Screw Terminal (ST) | RAISED (FR) | Nickel plated brass(N) | R19FRNSTAG | H |
| Screw Terminal (ST) | RAISED (FR) | Al alloy black (A) | R19FRASTAG | H |
| Screw Terminal (ST) | SUPER FLUSH (PF) | Stainless steel (S) | R19PFSSTAG | I |
| Screw Terminal (ST) | SUPER FLUSH (PF) | Nickel plated brass(N) | R19PFNSTAG | I |
| Screw Terminal (ST) | SUPER RAISED (PR) | Stainless steel (S) | R19PRSSTAG | J |
| Screw Terminal (ST) | SUPER RAISED (PR) | Nickel plated brass(N) | R19PRNSTAG | J |
.png)
